This aluminum-beryllium master alloy containing 2.0%-4.0% beryllium (YS/T 282) is used to add beryllium in aluminum alloy melting under low temperature, with little loss of beryllium.
1. Dry it by baking before use;
2. Adding temperature: Over 700℃
3. Dosage: To be determined by testing.
4. Adding method: Flick off scum, add it into molten aluminum carefully, stir evenly after melting, and keep it still for 5-10min.
III. Packing and storage
This product of Ingot shape presents metallic luster. It is packed in carton by 25±0.25kg/case, and should be stored in a well-ventilated place and protected against moisture.
Fair and Customers
Products for Export
If need others, kindly check the following products.
|Master Alloys||AlTi5B, AlSr3.5/10/15, AlSi20/50, AlMn10/20/30/40, AlTi5/10, AlRE10/15, AlV4/5/10, AlFe20, AlBe3/5, AlB3, AlCu50, AlZr5/10, CuP14, AlCr5/10, AlNi10, AlTi5BRE10, AlSb4, ZnRE5, CuRE10/15, etc.|
|Alloying tablets||Mn75/80, Ti20/30/60/75/80, Fe75/80, Cr60/75, Si95, etc.|
|Removal Fluxes||Magnesium Removal flux, Natrium Removal flux, Calcium Removal flux, etc.|
|Aluminum refining and drossing fluxes||Al refining fluxes, Al drossing fluxes, Al covering fluxes|
|Aluminum modifying fluxes and grain refining fluxes||Refining Modifying Drossing Flux, Sodium Modifying Flux, Strontium Modifying Flux, Phosphorous Modifying Flux, Titanium Boron Refining Flux, Copper flux, Zinc flux, Magnesium flux.|