1.Properties & Applications:
(1). ZS-ZJ0 will cause the molten zinc to roll in the using process, reaction times: 15～20 minutes.
(2). Apply to refining treatment of zinc and zinc alloys, effectively removing the impurity and gas in the molten zinc, improving interior qualities of the materials and mechanical properties of the finished products.
(1). Operation method: Push ZS-ZJ0 into the deep (about 7～10 cm from furnace bottom) of the molten zinc, and horizontally move it around until reaction finish. Skimming off the dross, the molten zinc is ready for cast.
(2). Temperature: 410~460℃.
(3). Dosage: 0.3~0.6% of the total metal weight.
3.Package and Storage:
Appearance: Dull gray cylindrical hard chunks.
250g/pc. 120pcs in a carton, 30kg/carton.
Keep dry and ventilated.
4.Period of Validity:
Applied to industry of zinc die casting, hot dip, scrap, custom-made ingot, etc.
The products include Refining flux ZS-ZJ0 (Tablet), refining and drossing flux ZS-ZJ1 and ZS-ZJ101 (low temperature), drossing flux ZS-ZZ, modifying flux ZS-ZB1.
Fair and Customers
Products for Export
If need others, kindly check the following products.
|Master Alloys||AlTi5B, AlSr3.5/10/15, AlSi20/50, AlMn10/20/30/40, AlTi5/10, AlRE10/15, AlV4/5/10, AlFe20, AlBe3/5, AlB3, AlCu50, AlZr5/10, CuP14, AlCr5/10, AlNi10, AlTi5BRE10, AlSb4, ZnRE5, CuRE10/15, etc.|
|Alloying tablets||Mn75/80, Ti20/30/60/75/80, Fe75/80, Cr60/75, Si95, etc.|
|Removal Fluxes||Magnesium Removal flux, Natrium Removal flux, Calcium Removal flux, etc.|
|Aluminum refining and drossing fluxes||Al refining fluxes, Al drossing fluxes, Al covering fluxes|
|Aluminum modifying fluxes and grain refining fluxes||Refining Modifying Drossing Flux, Sodium Modifying Flux, Strontium Modifying Flux, Phosphorous Modifying Flux, Titanium Boron Refining Flux, Copper flux, Zinc flux, Magnesium flux.|